Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.20 g/cm³ |
| Shrinkage rate | | ISO 294-4 | 0.60 % |
| Water absorption rate | | ISO 62 | 0.35 % |
| melt mass-flow rate | | ISO 1133 | 0.976 in³/10min |
| melt mass-flow rate | | ISO 1628-4 | 1270 in³/lb |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO 2039-2 | 70 M（Scale） |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmittance | | ISO 13468-2 | 89.0 ％ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527-2 | 60 MPa |
| elongation at break | | ISO 527-2 | >50 % |
| Tensile modulus | | ISO 527-2 | 2305 MPa |
| bending strength | | ISO 178 | 90 MPa |
| Flexural modulus | | ISO 178 | 2400 MPa |
| Impact strength of cantilever beam gap | | ISO 180/1A | 69.3 kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL -94 | V-2 0.75mm |
| UL flame retardant rating | | UL -94 | V-2 1.50mm |
| UL flame retardant rating | | UL -94 | V-2 3.00mm |
| Limiting Oxygen Index | | ISO 4589-2 | 26 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | >1.0E+15 Ω.cm |
| Surface Resistivity | | IEC 60093 | >1.0E+15 Ω.cm |
| dielectric strength | | IEC 60243-1 | 740 KV/mm |
| dielectric constant | | IEC 60250 | 2.90 1MHz |
| dielectric constant | | IEC 60250 | 3.00 100Hz |
| Dissipation Factor | | IEC 60250 | 9.2E-03 |
| Dissipation Factor | | IEC 60250 | 6.6E-04 100Hz |
| Dissipation Factor | | IEC 60112 | 225 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | IEC 60695-10-2 | Pass |
| Linear coefficient of thermal expansion | | | 1.7 Btu·in/hr/ft²/°F |
| Heat distortion temperature | | ISO 75-2/Af | 130 °C |
| vicat | | ISO 306/B50 | 145 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 3.6E-05 cm/cm／°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare