Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 90 g/10min |
| Shrinkage rate | | 内部方法 | 0.30 % |
| Shrinkage rate | | 内部方法 | 0.60 % |
| Water absorption rate | | ASTMD570 | >0.020 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 121 |
| processability | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D-955 | 0.6 % |
| Shrinkage rate | | ASTM D-955 | 0.3 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D-792 | 1.94 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| BarFlowLength | | 内部方法 | 125 mm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D-785 | 121 |
| tensile strength | | ASTM D-638 | 123 Mpa |
| bending strength | | ASTM D-790 | 225 Mpa |
| Flexural modulus | | ASTM D-790 | 20 GPa |
| Charpy impact strength | | ASTM D-256 | 64 J/m |
| Charpy impact strength | | ASTM D-256 | 206 J/m |
| | ASTM D-638 | 0.8 % |
| tensile strength | | ASTMD638 | 116 Mpa |
| elongation | | ASTMD638 | 0.60 % |
| Flexural modulus | | ASTMD790 | 20000 Mpa |
| bending strength | | ASTMD790 | 221 Mpa |
| Tensile Weld Strength | | ASTMD638 | 39.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 210 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dielectric breakdown strength | | ASTM D-149 | 14 KV/mm |
| Volume resistance value | | ASTM D-257 | 4×1016 Ω.cm |
| dielectric constant | | ASTM D-150 | 4.9 |
| Dissipation coefficient | | ASTM D-150 | 0.0015 |
| Thermal conductivity | | 自定标准 | 0.48 W/m.K |
| Volume resistivity | | ASTMD257 | 1E+18 ohms·cm |
| dielectric strength | | ASTMD149 | 15 KV/mm |
| dielectric constant | | ASTMD150 | 4.90 |
| Dissipation Factor | | ASTMD150 | 1.5E-03 |
| arc resistance | | ASTMD495 | 150 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | 自定标准 | 2 |
| Flame retardancy | | UL 94 | V-0 |
| | ASTM D-648 | ＞260 °C |
| | ASTMD648 | >260 °C |
| melting temperature | | 内部方法 | 285 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices