Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 收缩率 | MD：3.20mm | 内部方法 | 0.50to0.70 % |
| 收缩率 | TD：3.20mm | 内部方法 | 0.50to0.70 % |
| 熔体质量流动速率 | 337°C/6.6kg | ASTMD1238 | 13 g/10min |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| RTI Str | | UL746 | 105 °C |
| 热变形温度 | 1.8MPa,未退火,6.40mm | ASTMD648 | 209 °C |
| 维卡软化温度 | | ASTMD15256 | 210 °C |
| 线性热膨胀系数 | MD：-40到40°C | ASTME831 | 3.6E-05 cm/cm/°C |
| RTI Imp | | UL746 | 105 °C |
| RTI Elec | | UL746 | 105 °C |
| 线性热膨胀系数 | TD：-40到40°C | ASTME831 | 7.2E-05 cm/cm/°C |
| 热变形温度 | 0.45MPa,未退火,6.40mm | ASTMD648 | 214 °C |
| 热变形温度 | 1.8MPa,未退火,3.20mm | ASTMD648 | 206 °C |
| 热变形温度 | 0.45MPa,未退火,3.20mm | ASTMD648 | 211 °C |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| FlameRating | 0.41mm | UL94 | V-0 |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 相比耐漏电起痕指数(CTI) | CTI | UL746 | PLC 4 |
| 高电弧燃烧指数(HAI) | HAI | UL746 | PLC 3 |
| 高电压电弧起痕速率(HVTR) | HVTR | UL746 | PLC 3 |
| 耐电弧性7 | | ASTMD495 | PLC6 |
| 热丝引燃(HWI) | HWI | UL746 | PLC 1 |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 伸长率 | 断裂 | ASTMD638 | 3.0 % |
| 伸长率 | 屈服 | ASTMD638 | 3.0 % |
| 抗张强度 | 断裂 | ASTMD638 | 138 Mpa |
| 拉伸模量 | | ASTMD638 | 6890 Mpa |
| 抗张强度 | 屈服 | ASTMD638 | 138 Mpa |
| FlexuralStrength5 | Yield,50.0mmSpan | ASTMD790 | 207 Mpa |
| FlexuralStrength4 | Break,100mmSpan | ASTMD790 | 207 Mpa |
| 弯曲模量 | 100mmSpan4 | ASTMD790 | 6890 Mpa |
| 弯曲模量 | 50.0mm跨距5 | ASTMD790 | 6890 Mpa |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 装有测量仪表的落镖冲击 | 23°C,TotalEnergy | ASTMD3763 | 14.9 J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices