Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.24 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 50 g/10min |
| Shrinkage rate | | ASTMD955 | 0.50到0.60 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 61 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 48.3 MPa |
| tensile strength | | ASTMD638 | 48.3 MPa |
| elongation | | ASTMD638 | 900 % |
| elongation | | ASTMD638 | 900 % |
| | ASTMD3389 | 30.9 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 无断裂 |
| Impact strength of cantilever beam gap | | ASTMD256 | 无断裂 |
| Dart impact equipped with measuring instruments | | ASTMD3763 | 36.2 J |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD624 | 150 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTMD15254 | 204 °C |
| melting temperature | | | 218 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare