Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPE PermaFlex® 55 RAUH USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| Dart impact | ASTM D3763 | 36.2 J | |
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 无断裂 |
| 23°C | ASTM D256 | 无断裂 |
| hardness | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 61 |
| Mechanical properties | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| tensile strength | 断裂,23°C | ASTM D638 | 48.3 MPa |
| elongation | 断裂,-40°C | ASTM D638 | 900 % |
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D3389 | 30.9 mg |
| tensile strength | 断裂,-40°C | ASTM D638 | 48.3 MPa |
| elongation | 断裂,23°C | ASTM D638 | 900 % |
| flammability | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| elastomer | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| tear strength | ASTM D624 | 150 kN/m |
| physical property | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.60 % |
| density | ASTM D792 | 1.24 g/cm³ | |
| melt mass-flow rate | 240°C/2.16kg | ASTM D1238 | 50 g/10min |
| Thermal performance | Test Condition | Test Method | RAUH USA/PermaFlex® 55 |
|---|---|---|---|
| vicat | ASTM D15254 | 204 °C | |
| melting temperature | 218 °C |
Contact Us
Get App
Top