Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ASTM D570 | 0.72 % |
| Shrinkage rate | | ASTM D995 | 0.90 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 120 R |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D695 | 82.0 Mpa |
| Impact strength of cantilever beam gap | | ASTM D256 | 43.0 J/m |
| Flexural modulus | | ASTM D790 | 3500 Mpa |
| bending strength | | ASTM D790 | 125 Mpa |
| elongation at break | | ASTM D638 | 4.7 % |
| tensile strength | | ASTM D638 | 79.0 Mpa |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL -94 | HB 0.75mm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTM D150 | 0.040 |
| dielectric constant | | ASTM D150 | 3.4 1MHz |
| dielectric strength | | ASTM D149 | 25.0 KV/mm |
| Volume resistivity | | ASTM D257 | 1E+12 Ω.cm |
| Dissipation Factor | | ASTM D495 | 80 S |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | ASTM D696 | 7.3E-05 cm/cm/°C |
| Heat distortion temperature | | ASTM D648 | 150 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices