Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAR AX-1500W UNICAR JAPAN
U-POLYMER
Plastic bag,Display decoration
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
Rockwell hardness | ASTM D785 | 120 R |
thermal performance | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
Hot deformation temperature | 1.80MPaUnannealed | ASTM D648 | 150 °C |
Linear coefficient of thermal expansion | MD | ASTM D696 | 7.3E-05 cm/cm/°C |
flame retardant performance | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
UL flame retardant rating | UL -94 | HB 0.75mm |
mechanical properties | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
Bending modulus | 23°C | ASTM D790 | 3500 Mpa |
bending strength | 23°C | ASTM D790 | 125 Mpa |
Elongation at Break | 23°C | ASTM D638 | 4.7 % |
Impact strength of cantilever beam gap | 压缩强度 | ASTM D695 | 82.0 Mpa |
23°C | ASTM D256 | 43.0 J/m | |
tensile strength | 23°C | ASTM D638 | 79.0 Mpa |
Electrical performance | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
Dielectric constant | ASTM D150 | 3.4 1MHz | |
Dielectric strength | ASTM D149 | 25.0 KV/mm | |
Dissipation factor | 耐电弧性 | ASTM D495 | 80 S |
ASTM D150 | 0.040 | ||
Volume resistivity | ASTM D257 | 1E+12 Ω.cm |
Physical properties | Test Condition | Test Method | UNICAR JAPAN/AX-1500W |
---|---|---|---|
Shrinkage rate | MD3.00mm | ASTM D995 | 0.90 % |
Water absorption rate | (23°C,24hr) | ASTM D570 | 0.72 % |