TPE Hytrel® 5556 DUPONT USA
500
- Properties:Aging resistanceWeather resistanceThermal stability
- Usages:Industrial applications
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 90 °C | |
| melt mass-flow rate | ASTM D-1238 | 7.5 g/10min | |
| Taber abraser | ASTM D-1044 | 64 mg/1000rev | |
| ASTM D-1044 | 6 mg/1000rev |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D-570 | 0.5 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D-256 | 不破裂 J/m | |
| Shore hardness | ASTM D-2240 | 55 | |
| tensile strength | ASTM D-638 | 6.9 Mpa | |
| ASTM D-638 | 10.3 Mpa | ||
| elongation at break | ASTM D-638 | 500 % | |
| Initial tear strength | ASTM D-1004 | 158 kN/m | |
| elongation at break | ASTM D-638 | 40 Mpa | |
| Rubbing modulus | ASTM D-790 | 207 Mpa |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D-1052 | >5×10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ASTM D-3418 | 203 °C | |
| vicat | ASTM D-1525 | 180 °C | |
| Heat distortion temperature | ASTM D-648 | 49 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top