Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPE 5556 DUPONT USA
Hytrel®
Industrial applications
Aging resistance、Weather resistance、Thermal stability
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | DUPONT USA/5556 |
|---|---|---|---|
| bending strength | ASTM D-1052 | >5×10 |
| Basic performance | Test Condition | Test Method | DUPONT USA/5556 |
|---|---|---|---|
| Water absorption rate | 24小时 | ASTM D-570 | 0.5 % |
| Mechanical properties | Test Condition | Test Method | DUPONT USA/5556 |
|---|---|---|---|
| Initial tear strength | ASTM D-1004 | 158 kN/m | |
| tensile strength | 10%伸长 | ASTM D-638 | 10.3 Mpa |
| elongation at break | 断裂 | ASTM D-638 | 40 Mpa |
| Shore hardness | ASTM D-2240 | 55 | |
| Rubbing modulus | 23℃ | ASTM D-790 | 207 Mpa |
| tensile strength | 5%伸长 | ASTM D-638 | 6.9 Mpa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 不破裂 J/m |
| elongation at break | ASTM D-638 | 500 % |
| physical property | Test Condition | Test Method | DUPONT USA/5556 |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 7.5 g/10min | |
| Taber abraser | H 18轮 | ASTM D-1044 | 64 mg/1000rev |
| CS-17轮 | ASTM D-1044 | 6 mg/1000rev | |
| Heat distortion temperature | @0.5Mpa，HDT | ASTM D-648 | 90 °C |
| Thermal performance | Test Condition | Test Method | DUPONT USA/5556 |
|---|---|---|---|
| melting temperature | ASTM D-3418 | 203 °C | |
| vicat | ASTM D-1525 | 180 °C | |
| Heat distortion temperature | @0.18Mpa，HDT | ASTM D-648 | 49 °C |
Contact Us
Get App
Top