Polyarylate U-polymer UG-100-30
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.44 g/cm³ | |
| Shrinkage rate | ASTMD995 | 0.55 % | |
| ASTMD995 | 0.30-0.55 % | ||
| Water absorption rate | ASTMD570 | 0.24 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTMD785 | 122 R |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTMD638 | 132 MPa | |
| elongation at break | ASTMD638 | 2.5 % | |
| bending strength | ASTMD790 | 133 MPa | |
| Flexural modulus | ASTMD790 | 5700 MPa | |
| Impact strength of cantilever beam gap | ASTMD256 | 100 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dielectric Strength | ASTMD149 | 35.0 KV/mm | |
| dielectric constant | ASTMD150 | 3.0 1MHz | |
| Dissipation Factor | ASTMD150 | 0.015 | |
| ASTMD257 | 4.6E+14 Ω.cm | ||
| Dissipation Factor | ASTMD495 | 120 s |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 180 °C | ||
| ASTMD696 | 3.5E-05 cm/cm／°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top