Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Polyarylate U-polymer UG-100-30 UNITIKA JAPAN
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | UNITIKA JAPAN/U-polymer UG-100-30 |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 122 R |
| Mechanical properties | Test Condition | Test Method | UNITIKA JAPAN/U-polymer UG-100-30 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 133 MPa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 100 J/m |
| tensile strength | 23°C | ASTM D638 | 132 MPa |
| Flexural modulus | 23°C | ASTM D790 | 5700 MPa |
| elongation at break | 23°C | ASTM D638 | 2.5 % |
| Electrical performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer UG-100-30 |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 0.015 | |
| dielectric strength | ASTM D149 | 35.0 KV/mm | |
| Volume resistivity | ASTM D257 | 4.6E+14 Ω.cm | |
| dielectric constant | ASTM D150 | 3.0 1MHz | |
| Dissipation Factor | 耐电弧性 | ASTM D495 | 120 s |
| physical property | Test Condition | Test Method | UNITIKA JAPAN/U-polymer UG-100-30 |
|---|---|---|---|
| Shrinkage rate | TD3.00mm | ASTM D995 | 0.30-0.55 % |
| MD3.00mm | ASTM D995 | 0.55 % | |
| Water absorption rate | (23°C,24hr) | ASTM D570 | 0.24 % |
| density | ASTM D792 | 1.44 g/cm³ |
| Thermal performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer UG-100-30 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.5E-05 cm/cm／°C |
| Heat distortion temperature | 1.80MPa未退火，HDT | ASTM D648 | 180 °C |
Contact Us
Get App
Top