Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.42 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 15 cm3/10min |
| Water absorption rate | | ISO 62 | 0.4 % |
| Water absorption rate | | ISO 62 | 0.2 % |
| viscosity number | | ISO 307 | 112 cm³/g |
| Shrinkage rate | | | 0.5 % |
| Shrinkage rate | | | 1.4 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Automotive Materials | | FMVSS 302 | Pass |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 6200 Mpa |
| tensile strength | | ISO 527-2 | 100 Mpa |
| Tensile strain | | ISO 527-2 | 3.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179/1eA | 5.5 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 41 kJ/m² |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Electrical performance | | IEC 60093 | 10000000000000 ohms·cm |
| relative permittivity | | IEC 60250 | 0.0012 |
| relative permittivity | | IEC 60250 | 0.015 |
| Dissipation Factor | | IEC 60250 | 0.00037 |
| Dissipation Factor | | IEC 60250 | 0.00037 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 220 °C |
| Heat distortion temperature | | ISO 75-2/A | 200 °C |
| melting temperature | | ISO 11357-3 | 223 °C |
| Linear coefficient of thermal expansion | | ISO 11359-2 | 0.000040 1/℃ |
| maximum service temperature | | | 210 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices