PA66 Vydyne® 50BW
31
- Properties:AntisolventAntichemicalOil resistantHigh liquiditytoughnessChemical resistance
- Usages:Injection molding applications with basic engineer
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.14 g/cm³ | |
| Mold shrinkage rate | ISO 294-4 | 1.2 % | |
| ISO 294-4 | 1.4 % | ||
| Water absorption rate | ISO 62 | 1.3 % | |
| ISO 62 | 2.4 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Yield tensile strength | ISO 527 | 80 Mpa | |
| elongation | ISO 527 | 45 % | |
| Tensile modulus | ISO 527 | 3000 Mpa | |
| Flexural modulus | ISO 178 | 2900 Mpa | |
| bending strength | ISO 178 | 33 Mpa | |
| Charpy notch impact strength | ISO 179 | 6.5 kJ/m² | |
| ISO 179 | 5.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dielectric Strength | IEC 60243 | 12 KV/mm | |
| Volume resistivity | IEC 60093 | 6 ohm-cm×1015 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting point | ISO 3146 | 260 °C | |
| Heat distortion temperature | ISO 75 | 70 °C | |
| ISO 75 | 200 °C | ||
| Flame retardancy | UL94 | V-2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top