Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 14 g/10min |
| Melt volume flow rate | | ISO1133 | 12.0 cm3/10min |
| Shrinkage rate | | ISO294-4 | 1.7 % |
| Shrinkage rate | | ISO294-4 | 1.8 % |
| Water absorption rate | | ISO62 | 0.30 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FMVSS flammability | | FMVSS302 | B |
| Burning rate 3 | | ISO3795 | 28 mm/min |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Emission | | VDA275 | <8.00 mg/kg |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2 | 3000 Mpa |
| Tensile stress | | ISO527-2 | 66.0 Mpa |
| Tensile strain | | ISO527-2 | 11 % |
| Nominal tensile fracture strain | | ISO527-2 | 23 % |
| TensileCreepModule | | ISO899-1 | 2400 Mpa |
| Tensile creep modulus | | ISO899-1 | 1600 Mpa |
| Flexural modulus | | ISO178 | 2800 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 130 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 160 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO75-2/B | 164 °C |
| Heat distortion temperature | | ISO75-2/A | 97.0 °C |
| melting temperature | | ISO11357-3 | 178 °C |
| | ISO11359-2 | 1.2E-04 cm/cm/°C |
| | ISO11359-2 | 1.2E-04 cm/cm/°C |
| AnnealingTemperature | | | 160 °C |
| AnnealingTime-Optional | | | 30.0 min/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices