Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM 500AL NC010 DUPONT JAPAN
Delrin®
Household appliances,Bottle cap,Industrial applications,Automotive sector,Electronic field,Electrical field,Non specific food applications
Dimensional stability,Fatigue resistance,High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Supplementary Information | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
Emission | VDA275 | <8.00 mg/kg |
thermal performance | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
AnnealingTemperature | 160 °C | ||
AnnealingTime-Optional | 30.0 min/mm | ||
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 164 °C |
1.8MPa,Unannealed | ISO 75-2/A | 97.0 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.2E-04 cm/cm/°C |
MD | ISO 11359-2 | 1.2E-04 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 178 °C |
mechanical properties | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
Bending modulus | ISO 178 | 2800 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 23 % | |
Tensile creep modulus | 1hr | ISO 899-1 | 2400 Mpa |
1000hr | ISO 899-1 | 1600 Mpa | |
Tensile modulus | ISO 527-2 | 3000 Mpa | |
Tensile strain | Yield | ISO 527-2 | 11 % |
tensile strength | Yield | ISO 527-2 | 66.0 Mpa |
Physical properties | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
melt mass-flow rate | ISO 1133 | 14 g/10min | |
Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 12.0 cm3/10min |
Shrinkage rate | MD | ISO 294-4 | 1.8 % |
TD | ISO 294-4 | 1.7 % | |
Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.30 % |
impact performance | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 130 kJ/m² |
23°C | ISO 179/1eU | 160 kJ/m² |
flammability | Test Condition | Test Method | DUPONT JAPAN/500AL NC010 |
---|---|---|---|
Burning rate | 1.00mm | ISO 3795 | 28 mm/min |
FMVSS flammability | FMVSS302 | B | |
UL flame retardant rating | 0.75mm | UL 94 | HB |
0.75mm | IEC 60695-11-10,-20 | HB | |
1.5mm | IEC 60695-11-10,-20 | HB | |
1.5mm | UL 94 | HB |