Technical Data Sheet
| 物理性能 | Test Condition | Test Method | Test Result |
|---|
| 熔体体积流动速率 | 260°C/5.0kg | ISO1133 | 15.0 cm3/10min |
| 收缩率 | MD1 | 内部方法 | 0.40到0.60 % |
| 吸水率 | 饱和,23°C | ISO62 | 0.60 % |
| 吸水率 | 平衡,23°C,50%RH | ISO62 | 0.20 % |
| 热性能 | Test Condition | Test Method | Test Result |
|---|
| 0.45MPa,未退火,100mm跨距 | | ISO75-2/Be | 125 °C |
| 1.8MPa,未退火,100mm跨距 | | ISO75-2/Ae | 101 °C |
| BallPressureTest | 75°C | IEC60695-10-2 | Pass |
| BallPressureTest | 105°C7 | IEC60695-10-2 | Pass |
| 线性热膨胀系数 | MD：23到60°C | ISO11359-2 | 8E-05 cm/cm/°C |
| 导热系数 | | ISO8302 | 0.20 W/m/K |
| RTI Elec | | UL746 | 50.0 °C |
| RTI Imp | | UL746 | 50.0 °C |
| RTI | | UL746 | 50.0 °C |
| 可燃性 | Test Condition | Test Method | Test Result |
|---|
| UL阻燃等级 | 0.750mm | UL94 | HB |
| UL阻燃等级 | 3.00mm | UL94 | HB |
| 灼热丝易燃指数 | 3.20mm | IEC60695-2-12 | 750 °C |
| 极限氧指数 | | ISO4589-2 | 20 % |
| 机械性能 | Test Condition | Test Method | Test Result |
|---|
| 屈服 | | ISO527-2/50 | 59.0 Mpa |
| 断裂 | | ISO527-2/5 | 55.0 Mpa |
| 断裂 | | ISO527-2/50 | 59.0 Mpa |
| 屈服 | | ISO527-2/5,ISO527-2/50 | 4.0 % |
| 断裂 | | ISO527-2/5 | 120 % |
| 断裂 | | ISO527-2/50 | >50 % |
| 弯曲模量2 | | ISO178 | 2400 Mpa |
| 弯曲应力3 | | ISO178 | 80.0 Mpa |
| 泰伯耐磨性 | 1000Cycles,1000g,CS-17转轮 | 内部方法 | 125 mg |
| 拉伸模量 | | ISO527-2/1 | 2500 Mpa |
| 屈服 | | ISO527-2/5 | 55.0 Mpa |
| 电气性能 | Test Condition | Test Method | Test Result |
|---|
| 表面电阻率 | | IEC60093 | >1.0E+15 ohms |
| 体积电阻率 | | IEC60093 | >1.0E+15 ohms·cm |
| 介电强度 | 3.20mm,在油中 | IEC60243-1 | 17 KV/mm |
| 相对电容率 | 1MHz | IEC60250 | 2.90 |
| 耗散因数 | 1MHz | IEC60250 | 0.015 |
| 漏电起痕指数 | | IEC60112 | 175 V |
| 硬度 | Test Condition | Test Method | Test Result |
|---|
| 洛氏硬度 | R计秤 | ISO2039-2 | 118 |
| 球压硬度 | H358/30 | ISO2039-1 | 104 Mpa |
| 冲击性能 | Test Condition | Test Method | Test Result |
|---|
| 简支梁缺口冲击强度4 | 23°C | ISO179/1eA | 65 kJ/m² |
| 悬壁梁缺口冲击强度5 | -30°C | ISO180/1A | 10 kJ/m² |
| 悬壁梁缺口冲击强度5 | 23°C | ISO180/1A | 45 kJ/m² |
| 简支梁缺口冲击强度4 | -30°C | ISO179/1eA | 10 kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices