MDPE TIPELIN® FS 383-03 MOL Petrochemicals Co. Ltd.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.938 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 0.18 g/10min | |
| ISO 1133 | 15 g/10min | ||
| ISO 1133 | 0.87 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 60 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | Compression Molded | ISO 178 | 900 MPa |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| film thickness | 70 µm | ||
| tensile strength | ISO 527-3 | 24.0 MPa | |
| ISO 527-3 | 19.0 MPa | ||
| ISO 527-3 | 51.0 MPa | ||
| ISO 527-3 | 48.0 MPa | ||
| elongation | ISO 527-3 | 700 % | |
| ISO 527-3 | 800 % | ||
| Dart impact | ISO 7765-1/A | 100 g | |
| Elmendorf tear strength | ISO 6383-2 | 0.45 N | |
| ISO 6383-2 | 3.6 N | ||
| SpencerImpact-BlownFilm | ASTM D3420 | 37.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| OxidationInductionTime-CompressionMolded | EN728 | 42 min | |
| vicat | ISO 306/A120 | 119 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top