PPSU Paryls® mPPSU M1150 Jiangmen Youju New Materials Co., Ltd.
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.28 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 15to20 g/10min | |
| Shrinkage rate | ISO 294-4 | 0.80 % | |
| ISO 294-4 | 0.70 % | ||
| Water absorption rate | ISO 62 | 0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ISO 527-2 | 75.0 MPa | |
| Tensile strain | Yield | ISO 527-2 | 7.0 % |
| Flexural modulus | ISO 178 | 2400 MPa | |
| bending strength | ISO 178 | 105 MPa | |
| Tensile modulus | ISO 527-2 | 2690 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 10 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 44 kV/mm | |
| dielectric constant | IEC 60250 | 3.80 | |
| IEC 60250 | 3.70 | ||
| Dissipation Factor | IEC 60250 | 1.5E-03 | |
| IEC 60250 | 8.6E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 195 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top