Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPSU Paryls® mPPSU M1150 Jiangmen Youju New Materials Co., Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Jiangmen Youju New Materials Co., Ltd./Paryls® mPPSU M1150 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 10 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Jiangmen Youju New Materials Co., Ltd./Paryls® mPPSU M1150 |
|---|---|---|---|
| tensile strength | ISO 527-2 | 75.0 MPa | |
| Tensile modulus | ISO 527-2 | 2690 MPa | |
| Tensile strain | 屈服 | ISO 527-2 | 7.0 % |
| Flexural modulus | ISO 178 | 2400 MPa | |
| bending strength | ISO 178 | 105 MPa |
| Electrical performance | Test Condition | Test Method | Jiangmen Youju New Materials Co., Ltd./Paryls® mPPSU M1150 |
|---|---|---|---|
| dielectric constant | 100Hz | IEC 60250 | 3.80 |
| dielectric strength | ASTM D149 | 44 kV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| Dissipation Factor | 100Hz | IEC 60250 | 1.5E-03 |
| dielectric constant | 1MHz | IEC 60250 | 3.70 |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 8.6E-03 |
| physical property | Test Condition | Test Method | Jiangmen Youju New Materials Co., Ltd./Paryls® mPPSU M1150 |
|---|---|---|---|
| melt mass-flow rate | 380°C/2.16kg | ISO 1133 | 15to20 g/10min |
| Shrinkage rate | TD | ISO 294-4 | 0.80 % |
| MD | ISO 294-4 | 0.70 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.30 % |
| density | ISO 1183 | 1.28 g/cm³ |
| Thermal performance | Test Condition | Test Method | Jiangmen Youju New Materials Co., Ltd./Paryls® mPPSU M1150 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 195 °C |
Contact Us
Get App
Top