Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.42 g/cm³ |
| Shrinkage rate | | Internal Method | 0.6 % |
| Shrinkage rate | | Internal Method | 0.15 % |
| Water absorption rate | | ISO 62 | 0.11 % |
| density | | ISO1183 | 1.42 g/cm³ |
| SpiralFlow2.3 | | 内部方法 | 16.0 CM |
| Shrinkage rate | | 内部方法 | 0.60 % |
| Shrinkage rate | | 内部方法 | 0.15 % |
| Water absorption rate 4 | | ISO62 | 0.11 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO2039-2 | 75 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameRating | | UL94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | | >PC-GF30< |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ISO 178 | 180 Mpa |
| Charpy Notched Impact Strength | | ISO 179 | 17 kJ/m² |
| Rockwell hardness | | ISO 2039-2 | 75 |
| Tensile stress | | ISO 527-2 | 130 Mpa |
| Tensile strain | | ISO 527-2 | 4 % |
| Flexural modulus | | ISO 178 | 7900 Mpa |
| Tensile stress | | ISO527-2 | 130 Mpa |
| Nominal tensile fracture strain | | ISO527-2 | 4.0 % |
| Flexural modulus | | ISO178 | 7900 Mpa |
| Bending stress | | ISO178 | 180 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | 17 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | IEC 60250 | 2.95 |
| arc resistance | | ASTM D495 | 110 sec |
| electric strength | | IEC 60243-1 | > 22 KV/mm |
| dielectric strength | | IEC60243-1 | >22 KV/mm |
| dielectric constant | | IEC60250 | 3.45 |
| Dissipation Factor | | IEC60250 | 9E-03 |
| Volume resistivity | | ASTMD257 | >1.0E+16 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/A | 147 °C |
| Linear expansion coefficient | | ASTM D696 | 0.000023 cm/cm/℃ |
| UL flame retardant rating | | UL 94 | V-0 |
| | ISO75-2/A | 147 °C |
| | ISO11359-2 | 2.3E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices