TPU CR185A
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.10 g/cm³ | |
| durometer hardness | Shore A | ASTM D-2240 | 85 |
| density | ASTM D-792 | 1.10 g/cm3 | |
| durometer hardness | ASTM D-2240 | 85 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compression group | ASTM D-395 | 20 % | |
| Tensile stress | ASTM D412 | 5.39 MPa | |
| tensile strength | ASTM D412 | 21.6 MPa | |
| elongation | Break | ASTM D412 | 800 % |
| tear strength | Break | ASTM D624 | 88.3 kN/m |
| compression set | ASTM D395 | 20 % | |
| Compression group | 50 | ||
| Tensile stress | ASTM D-412 | 5.39 MPa | |
| 9.32 | MPa | ||
| 21.6 | MPa | ||
| elongation | Break | 800 | % |
| tear strength | ASTM D-624 | 88.3 kN/m |
| Performance project | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Test conditions [status] | 测试数据 | 数据单位 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 75.0 ℃ | |
| ASTM D-1525 | 75 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top