PCT Thermx® CG033
0
- Properties:Fillerglass fiber reinforced material30%filler by weight
- Usages:currency
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.45 g/cm³ | |
| Shrinkage rate | ISO294-4 | 0.80 % | |
| ISO294-4 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO178 | 8000 MPa | |
| Charpy Notched Impact Strength | ISO179/1eA | 8.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 50 kJ/m² | |
| tensile strength | ISO527-2 | 120 MPa | |
| elongation at break | ISO527-2 | 2.0 % | |
| Tensile modulus | ISO527-2 | 8500 MPa | |
| bending strength | ISO178 | 180 MPa |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| fire rating | ISO4589-2 | 29 % | |
| UL-94 | 0.80mm HB | ||
| UL-94 | 1.50mm HB | ||
| UL-94 | 3.00mm HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| IEC60093 | 1E+15 Ω.cm | ||
| Surface Resistivity | IEC60093 | >1.0E+15 Ω.cm | |
| Dielectric Strength | IEC60243-1 | 33 KV/mm | |
| Dissipation Factor | IEC60112 | 560 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/Bf | 270 °C | ||
| ISO75-2/Af | 262 °C | ||
| vicat | ISO11357-2 | 105 °C | |
| Melting Temperature | ISO11357-3 | 283 °C | |
| ISO11359-2 | 3.2E-05 cm/cm／°C | ||
| ISO11359-2 | 8.5E-05 cm/cm／°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top