ABS+SAN Generic ABS+SAN

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ASTM D792	1.08to1.09 g/cm³
density	density		ISO 1183	1.07to1.08 g/cm³
melt mass-flow rate		ASTM D1238	5.9to38 g/10min
melt mass-flow rate	melt mass-flow rate		ISO 1133	16to98 g/10min

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	121to123

Mechanical properties	Test Condition	Test Method	Test Result
Flexural modulus		ISO 178	3460 MPa
bending strength		ISO 178	36.3to92.0 MPa
bending strength	bending strength		ASTM D790	66.2to134 MPa
Tensile modulus		ASTM D638	3830to4090 MPa
tensile strength		ASTM D638	41.6to74.0 MPa
tensile strength	tensile strength		ASTM D638	53.6to74.0 MPa
elongation		ASTM D638	1.4to2.9 %
elongation	elongation		ASTM D638	1.7to2.9 %
Flexural modulus		ASTM D790	3440to3900 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	1.1to1.5 kJ/m²
Impact strength of cantilever beam gap		ASTM D256	14to46 J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180	1.6to3.2 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	95.2to110 °C
	Heat distortion temperature		ASTM D648	82.7to100 °C
	Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	82.9to99.6 °C
vicat		ISO 306	102to118 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top