Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS+SAN Generic ABS+SAN Generic
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Generic/Generic ABS+SAN |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179 | 1.1to1.5 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 14to46 J/m |
| 23°C | ISO 180 | 1.6to3.2 kJ/m² |
| hardness | Test Condition | Test Method | Generic/Generic ABS+SAN |
|---|---|---|---|
| Rockwell hardness | 23°C | ASTM D785 | 121to123 |
| Mechanical properties | Test Condition | Test Method | Generic/Generic ABS+SAN |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 3460 MPa |
| tensile strength | 断裂,23°C | ASTM D638 | 53.6to74.0 MPa |
| Tensile modulus | 23°C | ASTM D638 | 3830to4090 MPa |
| Flexural modulus | 23°C | ASTM D790 | 3440to3900 MPa |
| elongation | 屈服,23°C | ASTM D638 | 1.4to2.9 % |
| bending strength | 屈服,23°C | ASTM D790 | 66.2to134 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 41.6to74.0 MPa |
| bending strength | 23°C | ISO 178 | 36.3to92.0 MPa |
| elongation | 断裂,23°C | ASTM D638 | 1.7to2.9 % |
| physical property | Test Condition | Test Method | Generic/Generic ABS+SAN |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.07to1.08 g/cm³ |
| melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 5.9to38 g/10min |
| density | -- | ASTM D792 | 1.08to1.09 g/cm³ |
| melt mass-flow rate | 220°C/10.0kg | ISO 1133 | 16to98 g/10min |
| Thermal performance | Test Condition | Test Method | Generic/Generic ABS+SAN |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 82.7to100 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 95.2to110 °C | |
| vicat | ISO 306 | 102to118 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 82.9to99.6 °C |
Contact Us
Get App
Top