POM KEPITAL® F25-63
139
- Properties:Good liquiditycopolymerwear resistantLow friction coefficientMedium to low viscosity
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.41 g/cm³ | |
| melt mass-flow rate | ISO1133 | 15 g/10min | |
| Shrinkage rate | 内部方法 | 2.0 % | |
| Water absorption rate | ISO62 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO527-2/50 | 63.0 Mpa | |
| Nominal tensile fracture strain | ISO527-2 | 32 % | |
| Flexural modulus | ISO178 | 2500 Mpa | |
| Bending stress | ISO178 | 85.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 6.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC60093 | 1E+16 ohms | |
| Volume resistivity | IEC60093 | 1E+16 ohms·cm | |
| dielectric strength | IEC60243-1 | 19 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/A | 100 °C | ||
| melting temperature | ISO11357-3 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top