PC Makrolon® 3208 550111
84
- Properties:High impact resistancehigh molecular weightDrinking water contact
- Usages:building materialsCastersTransportation equipment
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
density | ISO 1183 | 1.2 g/cm³ | |
Apparent density | ISO 60 | 0.66 g/cm³ | |
melt mass-flow rate | ISO 1133 | 5.5 g/10min | |
Melt volume flow rate | ISO 1133 | 5 cm3/10min | |
Shrinkage rate | ISO 2577 | 0.60 - 0.80 % | |
ISO 2577 | 0.60 - 0.80 % | ||
ISO 294-4 | 0.75 % | ||
ISO 294-4 | 0.7 % | ||
Water absorption rate | ISO 62 | 0.3 % | |
ISO 62 | 0.12 % |
optical performance | Test Condition | Test Method | Test Result |
---|---|---|---|
refractive index | ISO 489 | 1.587 | |
transmittance | ISO 13468-2 | 89 % | |
ISO 13468-2 | 89 % | ||
ISO 13468-2 | 88 % | ||
ISO 13468-2 | 87 % | ||
Haze ratio | ISO 14782 | < 0.80 % |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Charpy Notched Impact Strength | ISO 7391 | 18 kJ/m² | |
ISO 7391 | 80 kJ/m² | ||
Impact strength of simply supported beam without notch | ISO 179/1eU | No Break | |
ISO 179/1eU | No Break | ||
ISO 179/1eU | No Break | ||
Impact strength of cantilever beam gap | ISO 7391 | 20 kJ/m² | |
ISO 7391 | 75 kJ/m² | ||
Multi axis Instrumented Impact Energy | ISO 6603-2 | 75 J | |
ISO 6603-2 | 65 J | ||
Multi axis Instrumented Peak Impact Force | ISO 6603-2 | 6700 N | |
ISO 6603-2 | 5800 N |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Tensile modulus | ISO 527-1-2 | 2350 Mpa | |
tensile strength | ISO 527-2/50 | 75 Mpa | |
ISO 527-2/50 | 65 Mpa | ||
Tensile strain | ISO 527-2/50 | 120 % | |
ISO 527-2/50 | 6.3 % | ||
Nominal tensile fracture strain | ISO 527-2/50 | > 50 % | |
Tensile Creep Modulus(1 hr)Tensile Creep Modulus (1 hr) | ISO 899-1 | 2200 Mpa | |
Tensile creep modulus | ISO 899-1 | 1900 Mpa | |
Flexural modulus | ISO 178 | 2350 Mpa | |
bending strength | ISO 178 | 72 Mpa | |
ISO 178 | 95 Mpa | ||
Bending Strain | ISO 178 | 7.2 % | |
ball-indentation hardness | ISO 2039-1 | 111 Mpa |
Flame retardant performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Flash Ignition TemperatureFlash Ignition Temperature | ASTM D1929 | 480 °C | |
auto-ignition temperature | ASTM D1929 | 550 °C |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Glass Transition Temperature | ISO 11357-2 | 150 °C | |
vicat | ISO 306 | 150 °C | |
ISO 306/B120 | 151 °C | ||
Ball indentation test | IEC 60695-10-2 | Pass | |
Linear coefficient of thermal expansion | ISO 11359-2 | 0.000065 1/℃ | |
ISO 11359-2 | 0.000065 1/℃ | ||
thermal conductivity | ISO 8302 | 0.2 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top