HDPE DOW™ 12110G DOW USA
6
Compare
View PricesTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 0.958 g/m | |
| melt mass-flow rate | ISO 1133 | 0.55 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Environmental cracking stress | IEC 60811-4-1/B | >1000 hr | |
| tensile breaking strength | ISO 527-2 | 32 Mpa | |
| Tensile fracture stress | ISO 527-2 | 890 % | |
| Shore hardness | ISO 868 | 61 |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| oxidation induction time | DIN EN 728 | 1.5 hr |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1.2E+17 ohm·cm | |
| dielectric constant | IEC 60250 | 2.5 | |
| Loss factor | IEC 60250 | 0.0003 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306 | 122 °C | |
| Melting temperature | ISO 11357 | 128 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top