Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE 12110G DOW USA
DOW™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | DOW USA/12110G |
|---|---|---|---|
| oxidation induction time | 200℃ | DIN EN 728 | 1.5 hr |
| Basic performance | Test Condition | Test Method | DOW USA/12110G |
|---|---|---|---|
| melt mass-flow rate | 190℃/2.16kg | ISO 1133 | 0.55 g/10min |
| density | ISO 1183 | 0.958 g/m |
| Mechanical properties | Test Condition | Test Method | DOW USA/12110G |
|---|---|---|---|
| Shore Hardness | Shore D，Compression Molded | ISO 868 | 61 |
| Environmental cracking stress | 50℃，10% Igepal，Compression Molded，F0 | IEC 60811-4-1/B | >1000 hr |
| tensile breaking strength | Compression Molded | ISO 527-2 | 32 Mpa |
| Tensile fracture stress | Compression Molded | ISO 527-2 | 890 % |
| Electrical performance | Test Condition | Test Method | DOW USA/12110G |
|---|---|---|---|
| dielectric constant | 1E+6Hz | IEC 60250 | 2.5 |
| Volume resistivity | IEC 60093 | 1.2E+17 ohm·cm | |
| Loss factor | 50Hz | IEC 60250 | 0.0003 |
| Thermal performance | Test Condition | Test Method | DOW USA/12110G |
|---|---|---|---|
| vicat | ISO 306 | 122 °C | |
| Melting temperature | ISO 11357 | 128 °C |
Contact Us
Get App
Top