Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 10 g/10min |
| Shrinkage rate | | ASTMD955 | 0.50 % |
| Shrinkage rate | | ISO294-4 | 1.2 % |
| Shrinkage rate | | ISO294-4 | 0.64 % |
| Water absorption rate | | ISO62 | 0.60 % |
| Water absorption rate | | ASTMD570 | 0.20 % |
| density | | ASTMD792 | 1.59 g/cm³ |
| density | | ISO1183 | 1.59 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 10 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 90 |
| Rockwell hardness | | ISO2039-2 | 96 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 147 Mpa |
| Tensile stress | | ISO527-2 | 140 Mpa |
| elongation | | ASTMD638 | 7.0 % |
| Tensile strain | | ISO527-2 | 3.0 % |
| Flexural modulus | | ASTMD790 | 7800 Mpa |
| Flexural modulus | | ISO178 | 8700 Mpa |
| bending strength | | ASTMD790 | 220 Mpa |
| Bending stress | | ISO178 | 200 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 7.5 kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD256 | 70 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1E+16 ohms |
| Surface Resistivity | | IEC60093 | 1E+16 ohms |
| Volume resistivity | | ASTMD257 | 1E+14 ohms·cm |
| Volume resistivity | | IEC60093 | 1E+14 ohms·cm |
| dielectric strength | | ASTMD149 | 19 KV/mm |
| dielectric strength | | IEC60243-1 | 19 KV/mm |
| dielectric constant | | ASTMD150 | 3.70 |
| Dissipation Factor | | ASTMD150 | 6E-03 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 162 °C |
| melting temperature | | ISO11357-3 | 166 °C |
| melting temperature | | | 166 °C |
| | ASTMD696 | 2.5E-05 cm/cm/°C |
| | ASTMD648 | 164 °C |
| | ASTMD648 | 163 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices