PA6 235L
0
- Properties:Performance characteristicslubricated
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ASTM D570 | 1.6 % | |
| Rockwell hardness | R-Scale | ASTM D785 | 115 |
| density | ASTMD792 | 1.13 g/cm³ | |
| Shrinkage rate | ASTMD955 | 1.0到1.4 % | |
| Water absorption rate | ASTMD570 | 1.6 % | |
| density | ASTM D792 | 1.13 g/cm3 | |
| Flow shrinkage rate | ASTM D955 | 1.0-1.4 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 115 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 75.8 MPa | |
| elongation | Break | ASTM D638 | 80 % |
| Flexural modulus | ASTM D790 | 2760 MPa | |
| bending strength | ASTM D790 | 110 MPa | |
| tensile strength | ASTMD638 | 75.8 MPa | |
| elongation | Break | ASTMD638 | 80 % |
| Flexural modulus | ASTMD790 | 2760 MPa | |
| bending strength | ASTMD790 | 110 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 59 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 177 °C | ||
| ASTM D648 | 177 ℃ | ||
| ASTM D648 | 60.0 ℃ | ||
| ASTMD648 | 60.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top