PPA+PA

PPA+PA DENYL HT 2010 Y VAMP TECH ITALY

Properties:
Filler glass fiber reinforced material 20% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ISO 180	25 kJ/m²
Impact strength of cantilever beam gap		ISO 180/A	5.0 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
elongation	Break	ASTM D638	1.5 %
tensile strength	Yield	ASTM D638	110 MPa
Tensile modulus		ASTM D638	7800 MPa

thermal performance	Test Condition	Test Method	Test Result
RTI		UL 746	140 °C
RTI Imp		UL 746	140 °C
RTI Elec		UL 746	140 °C
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648A	250 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	Saturation	ASTM D570	0.40 %
Shrinkage rate	TD	ASTM D955	0.80 %
Shrinkage rate	Shrinkage rate	MD	ASTM D955	0.45 %
density		ASTM D792	1.33 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
Compared to the anti leakage trace index		IEC 60112	PLC 0
Surface resistivity		ASTM D257	1E+13 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top