HIPS RPP30EU59HB BLACK
0
- Properties:Fillerfiberglass reinforcement30% weight filling
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.13 g/cm | |
| Shrinkage rate | ASTM D-955 | 0.20 % | |
| ASTM D-955 | 0.80 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 2.3 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 35.0 MPa | |
| Flexural modulus | ASTM D-790 | 2370 MPa | |
| ASTM D-790 | 2820 MPa | ||
| bending strength | ASTM D-790 | 49.0 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 454 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 1070 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 91.7 ℃ | |
| ASTM D-648 | 146 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top