Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HIPS RPP30EU59HB BLACK USA Fulu
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | USA Fulu/RPP30EU59HB BLACK |
|---|---|---|---|
| melt mass-flow rate | 230℃/3.8kg | ASTM D-1238 | 2.3 g/10min |
| Mechanical properties | Test Condition | Test Method | USA Fulu/RPP30EU59HB BLACK |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23℃ | ASTM D-256 | 1070 J/m |
| bending strength | 23℃ | ASTM D-790 | 49.0 MPa |
| tensile strength | 23℃ | ASTM D-638 | 35.0 MPa |
| Flexural modulus | 1%secant,23℃ | ASTM D-790 | 2370 MPa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 454 J/m |
| Flexural modulus | tangent,23℃ | ASTM D-790 | 2820 MPa |
| physical property | Test Condition | Test Method | USA Fulu/RPP30EU59HB BLACK |
|---|---|---|---|
| Shrinkage rate | Across Flow | ASTM D-955 | 0.80 % |
| density | ASTM D-792 | 1.13 g/cm | |
| Shrinkage rate | Flow | ASTM D-955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | USA Fulu/RPP30EU59HB BLACK |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa，未退火，HDT | ASTM D-648 | 146 ℃ |
| 1.80MPa，未退火，HDT | ASTM D-648 | 91.7 ℃ |
Contact Us
Get App
Top