Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.44 g/cm³ |
| Specific volume | | | 0.694 cm³/g |
| Shrinkage rate | | ASTMD955 | 0.40to0.50 % |
| Water absorption rate | | ASTMD570 | 0.40 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameRating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTMD638 | 96.5 MPa |
| elongation | Yield | ASTMD638 | 3.0to5.0 % |
| Flexural modulus | | ASTMD790 | 4140 MPa |
| bending strength | | ASTMD790 | 152 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 43 J/m |
| Suspended wall beam without notch impact strength | | ASTMD256 | 430 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1E+17 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 210 °C |
| | ASTMD696 | 3.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare