Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PES INSTRUC PESGF10 USA Infinity LTL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTM D256 | 43 J/m |
| Suspended wall beam without notch impact strength | 3.18mm | ASTM D256 | 430 J/m |
| Mechanical properties | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.0to5.0 % |
| Flexural modulus | ASTM D790 | 4140 MPa | |
| tensile strength | 屈服 | ASTM D638 | 96.5 MPa |
| bending strength | ASTM D790 | 152 MPa |
| Electrical performance | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+17 ohms |
| flammability | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| Specific volume | 0.694 cm³/g | ||
| Shrinkage rate | MD | ASTM D955 | 0.40to0.50 % |
| Water absorption rate | 24hr | ASTM D570 | 0.40 % |
| density | ASTM D792 | 1.44 g/cm³ |
| Thermal performance | Test Condition | Test Method | USA Infinity LTL/INSTRUC PESGF10 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 210 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.2E-05 cm/cm/°C |
Contact Us
Get App
Top