Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| MediumDensity | | | 1.20 g/cm³ |
| SpecificHeatCapacity of Melt | | | 2280 J/kg/°C |
| ThermalConductivityofMelt | | | 0.26 W/m/K |
| density | | ISO1183 | 1.36 g/cm³ |
| Melt volume flow rate | | ISO1133 | 15.0 cm3/10min |
| Shrinkage rate | | ISO294-4 | 0.60 % |
| Shrinkage rate | | ISO294-4 | 0.20 % |
| Water absorption rate | | ISO62 | 6.3 % |
| Water absorption rate | | ISO62 | 1.9 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO2039-2 | 121 |
| | ISO2039-1 | 230 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Burning rate 4 | | ISO3795 | 50 mm/min |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| UL flame retardant rating | | IEC60695-11-10,-20 | HB |
| Extreme Oxygen Index 5 | | ISO4589-2 | 21 % |
| FMVSS flammability | | FMVSS302 | B |
| atomization | | ISO6452 | 95 % |
| atomization | | ISO6452 | 1E-04 g |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Emissions of Organic Compounds | | VDA277 | 8.50 µgC/g |
| Odor | | VDA270 | 3.50 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile creep modulus | | ISO899-1 | -- Mpa |
| Bending modulus 2 | | ISO178 | 8500 Mpa |
| Bending stress 2 | | ISO178 | 280 Mpa |
| Tensile modulus | | ISO527-2 | 9500 Mpa |
| Tensile stress | | ISO527-2 | 190 Mpa |
| Tensile strain | | ISO527-2 | 3.5 % |
| TensileCreepModule | | ISO899-1 | -- Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 10 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 16 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 80 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 100 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 10 kJ/m² |
| Impact strength of cantilever beam gap | | ISO180/1A | 15 kJ/m² |
| | ISO180/1U | 80 kJ/m² |
| Multi axis Instrumented Impact Energy | | ISO6603-2 | 3.50 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 220 °C |
| | ISO75-2/A | 210 °C |
| Glass transition temperature 3 | | ISO11357-2 | 60.0 °C |
| vicat | | ISO306/B50 | 215 °C |
| Melting temperature 5 | | ISO11357-3 | 221 °C |
| | ISO11359-2 | 2.6E-05 cm/cm/°C |
| | ISO11359-2 | 7.5E-05 cm/cm/°C |
| EffectiveThermal Diffusivity | | | 9.1E-08 m²/s |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices