Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.08 g/cm³ |
| Melt volume flow rate | | ISO 1133 | 30.0 cm³/10min |
| Water absorption rate | | ISO 62 | 1.0 % |
| Water absorption rate | | ISO 62 | 0.22 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2/1 | 1900 MPa |
| tensile strength | | ISO 527-2/50 | 55.0 MPa |
| Tensile strain | | ISO 527-2/50 | 2.5 % |
| bending strength | | ISO 178 | 55.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | 1E+13 ohms |
| Volume resistivity | | IEC 60093 | 1E+13 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ISO 75-2/B | 90.0 °C |
| Heat distortion temperature | | ISO 75-2/A | 88.0 °C |
| vicat | | ISO 306/A50 | 105 °C |
| vicat | | ISO 306/B50 | 102 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare