Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS MABS 20 transparent Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+13 ohms·cm | |
| Surface Resistivity | IEC 60093 | 1E+13 ohms |
| Mechanical properties | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| tensile strength | 屈服,23°C | ISO 527-2/50 | 55.0 MPa |
| Tensile strain | 屈服,23°C | ISO 527-2/50 | 2.5 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 1900 MPa |
| bending strength | 23°C | ISO 178 | 55.0 MPa |
| flammability | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 30.0 cm³/10min |
| density | 23°C | ISO 1183 | 1.08 g/cm³ |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.22 % |
| 饱和,23°C | ISO 62 | 1.0 % |
| Thermal performance | Test Condition | Test Method | Bada AG/MABS 20 transparent |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 90.0 °C |
| vicat | -- | ISO 306/A50 | 105 °C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 88.0 °C |
| vicat | -- | ISO 306/B50 | 102 °C |
Contact Us
Get App
Top