Technical Data Sheet
| Uncured Properties | Test Condition | Test Method | Test Result |
|---|
| STORAGE STABILITY | | | 25到30 min |
| density | | | 1.32到1.38 g/cm³ |
| | | 1.1到1.5 Pa·s |
| Curing Time | | | 12到16 hr |
| thermosetting | Test Condition | Test Method | Test Result |
|---|
| Resin | | 按重量计算的混合比:100 |
| Hardener | | 按重量计算的混合比:23 |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO7619 | 84到90 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ISO178 | 4150到4450 MPa |
| Bending stress | | ISO178 | 95.0到115 MPa |
| compression stress | | ISO604 | 101到103 MPa |
| Bending Strain | | ISO178 | 3.0到3.8 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | 13到20 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 63.0到67.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare