Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy Ebalta LH 22 / GR Ebalta Kunststoff GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 13to20 kJ/m² |
| hardness | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 7619 | 84to90 |
| Mechanical properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| compression stress | ISO 604 | 101to103 MPa | |
| Bending Strain | ISO 178 | 3.0to3.8 % | |
| Flexural modulus | ISO 178 | 4150to4450 MPa | |
| bending strength | ISO 178 | 95.0to115 MPa |
| Uncured Properties | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| Viscosity | 25°C | 1.1to1.5 Pa·s | |
| STORAGE STABILITY | 20°C | 25to30 min | |
| density | 20°C | 1.32to1.38 g/cm³ | |
| Curing Time | 20°C | 12to16 hr |
| thermosetting | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| Thermosetting components | 按重量计算的混合比 | 100 | |
| 硬化法 | 按重量计算的混合比:23 |
| Thermal performance | Test Condition | Test Method | Ebalta Kunststoff GmbH/Ebalta LH 22 / GR |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 63.0to67.0 °C |
Contact Us
Get App
Top