ABS NWB/HI Schulman Plastics
0
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1050 kg/m | |
| Melt volume flow rate | ISO 1133 | 12.0 cm | |
| Water absorption rate | ISO 62 | 1.2 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 27.0 KJ/m | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | No Break KJ/m | |
| Tensile modulus | ISO 527-1 | 1900 MPa | |
| Tensile stress | ISO 527-1 | 42.0 MPa | |
| Tensile strain | ISO 527-1 | 3.0 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+13 ohm.cm | |
| relative permittivity | IEC 60250 | 3.20 | |
| IEC 60250 | 3.00 | ||
| Dielectric loss | IEC 60250 | 0.012 | |
| IEC 60250 | 0.0090 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-1 | 91.0 ℃ | |
| ISO 75-1 | 80.0 ℃ | ||
| vicat | ISO 306 | 93.0 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top