Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS NWB/HI Schulman Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Schulman Plastics/NWB/HI |
|---|---|---|---|
| Water absorption rate | ISO 62 | 1.2 % | |
| density | ISO 1183 | 1050 kg/m | |
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 12.0 cm |
| Mechanical properties | Test Condition | Test Method | Schulman Plastics/NWB/HI |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | No Break KJ/m |
| Tensile strain | 屈服 | ISO 527-1 | 3.0 % |
| Tensile modulus | ISO 527-1 | 1900 MPa | |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 27.0 KJ/m |
| Tensile stress | 屈服 | ISO 527-1 | 42.0 MPa |
| Electrical performance | Test Condition | Test Method | Schulman Plastics/NWB/HI |
|---|---|---|---|
| Dielectric loss | 1MHz | IEC 60250 | 0.0090 |
| Volume resistivity | IEC 60093 | >1.0E+13 ohm.cm | |
| relative permittivity | 100Hz | IEC 60250 | 3.20 |
| Dielectric loss | 100Hz | IEC 60250 | 0.012 |
| relative permittivity | 1MHz | IEC 60250 | 3.00 |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| Thermal performance | Test Condition | Test Method | Schulman Plastics/NWB/HI |
|---|---|---|---|
| vicat | 50℃/h 50N | ISO 306 | 93.0 ℃ |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 91.0 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 80.0 ℃ |
Contact Us
Get App
Top