PA6 Polimid B 40 EM2 Poliblend S.p.a.

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.09 g/cm³
Shrinkage rate		ISO 294-4	1.1 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.5 %
Water absorption rate		ISO 62	1.6/8.5 %

Mechanical properties	Test Method	Test Result
tensile strength	ISO 527-2	75 MPa
elongation at break	ISO 527-2	90 %
Tensile modulus	ISO 527-2	2500 MPa
Impact strength of cantilever beam gap	ISO 180/1A	14 kJ/m²
Suspended wall beam without notch impact strength	ISO 180/1U	NB kJ/m²

Flame retardant performance	Test Condition	Test Method	Test Result
UL flame retardant rating		UL -94	HB 3.00mm
	UL flame retardant rating		UL -94	HB 0.80mm
	UL flame retardant rating	UL flame retardant rating		UL -94	HB 1.50mm

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	1E+14 Ω.cm
Dissipation Factor		IEC 60112	>600 V

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/Af	70 °C
vicat		ISO 306/B50	200 °C
vicat	vicat	Melting Temperature	ISO 11357-3	222 °C
Linear coefficient of thermal expansion			80 °C
Heat distortion temperature		ISO 75-2/Bf	170 °C
Linear coefficient of thermal expansion		IEC 60695-10-2	>165 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top