PPA AMODEL® AT-1116HS
91
- Properties:High temperature resistanFiller: Glass fiber reinf16% filler by weight
- Usages:Electrical applicationsSpoolLaptop caseParts under the hood of a carbearingMachine/mechanical componentsIndustrial applicationsApplication in the automotive fieldMetal substitutionIndustrial componentscurrencyVehicle electronics
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.60 % | |
| ASTM D955 | 0.60 % | ||
| Water absorption rate | ASTM D570 | 0.20 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 6480 Mpa | |
| ISO 527-2 | 6890 Mpa | ||
| ISO 527-2 | 6690 Mpa | ||
| tensile strength | ASTM D638 | 161 Mpa | |
| ISO 527-2 | 160 Mpa | ||
| ISO 527-2 | 65.5 Mpa | ||
| elongation | ASTM D638 | 3.8 % | |
| Tensile strain | ISO 527-2 | 3.7 % | |
| ISO 527-2 | 4.2 % | ||
| Flexural modulus | ASTM D790 | 6000 Mpa | |
| ISO 178 | 6690 Mpa | ||
| ISO 178 | 4960 Mpa | ||
| bending strength | ASTM D790 | 226 Mpa | |
| ISO 178 | 197 Mpa | ||
| ISO 178 | 141 Mpa | ||
| compressive strength | ASTM D695 | 124 Mpa | |
| shear strength | ASTM D732 | 69.6 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 86 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 53 kJ/m² | |
| Dart impact | ASTM D3763 | 1.76 J | |
| ASTM D3763 | -- J | ||
| ASTM D3763 | 10.0 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 268 °C | |
| ISO 75-2/A | 258 °C | ||
| ASTM D648 | 254 °C | ||
| melting temperature | ASTM D3418 | 310 °C | |
| Linear coefficient of thermal expansion | ASTME831 | 2.2E-05 cm/cm/°C | |
| ASTME831 | 1.6E-05 cm/cm/°C | ||
| ASTME831 | 7.5E-05 cm/cm/°C | ||
| ASTME831 | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top