PK LUVOCOM® 70-9046

Usages:
Bearings
gears
cams
Compare

Technical Data Sheet

physical property	Test Method	Test Result
density	ISO1183	1.33 g/cm³
Melt volume flow rate	ISO1133	5.00 cm³/10min
Shrinkage rate	DIN16901	1.6到2.2 %
Water absorption rate		0.15 %

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Yield	ISO527-2	40 %
Flexural modulus		ISO178	1200 MPa
Bending stress		ISO178	65.0 MPa
Tensile modulus		ISO527-2	1400 MPa
Tensile stress	Break	ISO527-2	50.0 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO179/1eA	22 kJ/m²
Impact strength of simply supported beam without notch		ISO179/1fU	72 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC60167	>1.0E+11 ohms
Surface Resistivity		IEC60093	>1.0E+11 ohms

Thermal performance	Test Method	Test Result
	ISO75-2/A	100 °C
Continuous use temperature	UL746B	90.0 °C
Maximum operating temperature - SharrTerm		120 °C
vicat	ISO306/A	200 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top