PPS

PPS LUVOCOM® 1301-0915 LEHVOSS Group

Properties:
Filler carbon fiber reinforced material
Usages:
Textile applications medical nursing supplies automotive applications business equipment engineering accessories
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	23°C	ISO 179/1fU	19 kJ/m²

mechanical properties	Test Condition	Test Method	Test Result
Bending strain		ISO 178	1.5 %
bending strength		ISO 178	175 MPa
Bending modulus		ISO 178	10000 MPa
Tensile strain	Yield	ISO 527-2	1.2 %
tensile strength	Break	ISO 527-2	125 MPa
Tensile modulus		ISO 527-2	13000 MPa

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	MD	DIN 53752	3E-05 cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	220 °C
Maximum operating temperature	ShortTerm		240 °C
Continuous use temperature		UL 746B	220 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	23°C,24hr		<0.050 %
Shrinkage rate		DIN 16901	0.20to0.50 %
density		ISO 1183	1.49 g/cm³

Electrical performance	Test Condition	Test Method	Test Result
insulation resistance		IEC 60167	<1.0E+5 ohms
Surface resistivity		IEC 60093	<1.0E+3 ohms

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top