Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPS LUVOCOM® 1301-0915 LEHVOSS Group
--
Textile applications, medical, nursing supplies, automotive applications, business equipment, engineering accessories
Filler, carbon fiber reinforced material,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1301-0915 |
|---|---|---|---|
| Continuous use temperature | UL 746B | 220 °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 220 °C |
| Linear coefficient of thermal expansion | MD | DIN 53752 | 3E-05 cm/cm/°C |
| Maximum operating temperature | ShortTerm | 240 °C |
| mechanical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1301-0915 |
|---|---|---|---|
| Bending modulus | ISO 178 | 10000 MPa | |
| Bending strain | ISO 178 | 1.5 % | |
| bending strength | ISO 178 | 175 MPa | |
| Tensile modulus | ISO 527-2 | 13000 MPa | |
| Tensile strain | Yield | ISO 527-2 | 1.2 % |
| tensile strength | Break | ISO 527-2 | 125 MPa |
| Electrical performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1301-0915 |
|---|---|---|---|
| insulation resistance | IEC 60167 | <1.0E+5 ohms | |
| Surface resistivity | IEC 60093 | <1.0E+3 ohms |
| Physical properties | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1301-0915 |
|---|---|---|---|
| density | ISO 1183 | 1.49 g/cm³ | |
| Shrinkage rate | DIN 16901 | 0.20to0.50 % | |
| Water absorption rate | 23°C,24hr | <0.050 % |
| impact performance | Test Condition | Test Method | LEHVOSS Group/LUVOCOM® 1301-0915 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1fU | 19 kJ/m² |