
PA6 PX13012-BKNAT SABIC INNOVATIVE NETHERLANDS
177
Form:Granules
Properties:
Dimensional stabilityLow Specific GravityFiller: Mineral filler
Typical Applications:
Automotive body panelsAutomotive sector
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive body panels | Automotive sector |
| Properties: | Dimensional stability | Low Specific Gravity | Filler: Mineral filler |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| 23°C | ASTM D256 | 15 | J/m | |
| ISO 180/1A | 3.0 | kJ/m² | ||
| ASTM D4812 | 150 | J/m | ||
| ISO 180/1U | 9.0 | kJ/m² | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 0.800mm | UL 94 | V-0 | |
| Burning wire flammability index | 0.800mm | IEC 60695-2-12 | 960 | °C |
| Hot filament ignition temperature | 0.800mm | IEC 60695-2-13 | 750 | °C |
| 1.60mm | IEC 60695-2-13 | 775 | °C | |
| 3.00mm | IEC 60695-2-13 | 800 | °C | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| --2 | ASTM D638 | 10400 | Mpa | |
| yield | ASTM D638 | 68.0 | Mpa | |
| crack | ISO 527-2/5 | 75.0 | Mpa | |
| ASTM D638 | 1.2 | % | ||
| ISO 527-2/5 | 1.1 | % | ||
| 50.0mm span | ASTM D790 | 11800 | Mpa | |
| --6 | ISO 178 | 12000 | Mpa | |
| --7 | ISO 178 | 105 | Mpa | |
| Fracture, 50.0mm span | ASTM D790 | 119 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Ball Pressure Test | 165°C | IEC 60695-10-2 | Pass | |
| Flow: -40 to 40 ° C | ASTME831 | 3.3E-05 | cm/cm/°C | |
| Flow: -30 to 80 ° C | ISO 11359-2 | 3.9E-05 | cm/cm/°C | |
| Horizontal: -40 to 40 ° C | Across Flow, -40to40℃ | ASTME831 | 4.4E-05 | cm/cm/°C |
| Horizontal: -30 to 80 ° C | ISO 11359-2 | 5.5E-05 | cm/cm/°C | |
| thermal conductivity | --13 | ISO 22007-2 | 1.2 | W/m/K |
| --14 | ISO 22007-2 | 5.5 | W/m/K | |
| 0.45MPa, unannealed, 3.20mm | ASTM D648 | 203 | °C | |
| 0.45MPa, unannealed, 64.0mm span | ISO 75-2/Bf | 203 | °C | |
| 1.8MPa, unannealed, 3.20mm | ASTM D648 | 137 | °C | |
| 1.8MPa, unannealed, 64.0mm span of | ISO 75-2/Af | 160 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Flow direction: 24 hours | Flow, 24hr | ISO 294-4 | 0.55 | % |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.23 | % |
| flow | Internal Method | 0.70 | % | |
| Flow: 24 hours | 24hr | ASTM D955 | 0.55 | % |
| Lateral flow: 24 hours | Across Flow, 24hr | ASTM D955 | 0.65 | % |
| Vertical flow direction: 24 hours | Across Flow, 24hr | ISO 294-4 | 0.65 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| High arc combustion index | HAI | UL 746 | PLC 0 | |
| Hot wire ignition | HWI | UL 746 | PLC 0 | |
| Surface resistivity | ASTM D257 | 4E+14 | ohms | |
| Dielectric strength | 1.60mm,inOil | ASTM D149 | 7.2 | KV/mm |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.