PEI ULTEM™ 9085 WH8E479

Properties:
High mobility
Low toxicity
Low smoke
Usages:
Railway Applications
national defense
Profile
Aircraft interior parts
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D1238	8.9 g/10min
Melt volume flow rate		ISO 1133	65.5 cm3/10min
Shrinkage rate		内部方法	0.50-0.70 %
Water absorption rate		ISO 62	0.39 %
Water absorption rate	Water absorption rate		ISO 62	0.17 %

flammability	Test Method	Test Result
Limiting Oxygen Index	ASTM D2863	49 %
FAAFlammability	FAR25.853	<5
OSU peak heat release rate	FAR25.853	36.0 kW/m²
OSU total heat release	FAR25.853	16.0 kW·min/m²
VerticalBurnTest	FAR25.853	2.0 sec

Mechanical properties	Test Condition	Test Method	Test Result
Tensile strain		ISO 527-2/5	6.7 %
elongation		ASTM D638	72 %
Tensile strain		ISO 527-2/5	50 %
Flexural modulus		ASTM D790	2920 Mpa
Flexural modulus	Flexural modulus		ISO 178	2750 Mpa
bending strength		ISO 178	90.0 Mpa
bending strength	bending strength		ASTM D790	138 Mpa
Tensile modulus		ASTM D638	3440 Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	3050 Mpa
tensile strength		ASTM D638	84.0 Mpa
	tensile strength		ISO 527-2/5	88.0 Mpa
		tensile strength		ASTM D638	74.0 Mpa
		tensile strength	tensile strength		ISO 527-2/5	71.0 Mpa
elongation		ASTM D638	7.0 %

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ISO 180/1A	13 kJ/m²

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	153 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/Af	152 °C
vicat		ISO 306/B120	173 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PEI ULTEM™ 9085 WH8E479

Technical Data Sheet

You May Like