Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|
density | | ASTMD792A | 1.45 g/cm³ |
Water absorption rate | | ASTM D570 | 0.50 % |
Water absorption rate | | ISO 62 | 0.50 % |
flammability | Test Condition | Test Method | Test Result |
---|
UL flame retardant rating | | UL 94 | V-0 |
Impact resistance | Test Condition | Test Method | Test Result |
---|
Impact strength of cantilever beam gap | | ASTM D256A | 37 J/m |
Impact strength of cantilever beam gap | | ISO 180/2A | 3.7 kJ/m² |
Mechanical properties | Test Condition | Test Method | Test Result |
---|
Flexural modulus | | ISO 178 | 9700 MPa |
bending strength | | ASTM D790 | 79.3 MPa |
bending strength | | ISO 178 | 79.0 MPa |
compressive strength | | ASTMD695 | 179 MPa |
tensile strength | Yield | ASTM D638 | 48.3 MPa |
tensile strength | Yield | ISO 527-2 | 48.0 MPa |
Flexural modulus | | ASTM D790 | 9650 MPa |
Electrical performance | Test Condition | Test Method | Test Result |
---|
dielectric strength | | ASTM D149 | 7.9 kV/mm |
dielectric strength | | IEC 60243-1 | 8.7 kV/mm |
arc resistance | | ASTM D495 | 100 sec |
Thermal performance | Test Condition | Test Method | Test Result |
---|
Heat distortion temperature | | ASTMD648 | 199 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.